Designer picture frame clamp

V5-QRS - shadow-box

V5-QRS is a designer picture-framing clamp vise used for joining shadow-box and canvas floater frames. V5-QRS has high support bars aimed to support higher moldings. It comes with a Gap eliminator feature designed to eliminate joining gaps which typically appear in shadow box frames and floater moldings.

Our experience shows that since using V5-QRS shadow-box frame clamp enabled us to complete shadow box art projects efficiently and with more accuracy.

Features include:

  • Gap eliminator knobs - (mounted onto the support bars). Use the knobs to close any gaps and tighten the joints.
  • Quick Release - (at the back of the clamp), extend clamp opening size to fit frames up to 3.5" wide.
  • Clamp Handle - as turned clockwise creates clamping pressure up to 1,000 psi.
  • Support Bars - designed to support Shadow-box tall mouldings, while clamping.
  • clamping spring Jaws - (front of the clamp) deliver a powerful action to  push and tighten the corner joint and form a strong bond.

V5-QRS Shadowbox floater frame clamp

V5-QRS Shadowbox floater frame clamp
was: $798.00
$369.00
order online or call: 917-520-7370
For joining shadow box, floaters 3.5"
2017 model is now at 50% off, (limited offer)
. Buy Now

How to join a shadow box frame and floaters with V5-QRS frame clamp.

Instructions
    1. Draw the handle backwards and place the box moulding into the opening.
    2. Coat miter cuts with glue and align the frame corner.
    3. Turn clamp handle clockwise until clamping pressure achieved at the miter joint.
    4. Use the gap eliminator Knobs to close gaps and tighten the joint.
    5. Wipe off the excess glue.
    6. Allow 15-25 minutes for the glue to dry, before removing the frame clamps.
    7. Done.

V5-QRA was designed for a single hand operation thus free the other hand for aligning the frame while joining.

V5-QRS and shadow box frames

Joining shadow-box mouldings typically involves the need to avoid gaps which may occur by default. Use the gap eliminator knobs in order to:
1) eliminate joining gaps
2) getting a strong bond and tight joint.
3) avoid treating joint gaps or fill in.

MasterClamp v5-qrs is made of: machined steel and air craft aluminum for durability and long service life.  All Masterclamp products are manufactured and assembled in the USA.

The industry standard for framing clamps deliver a new shadowbox frame clamp and is packed with advanced features designed to inspire.

How to join shadow-box frame with v5-qrs clamp

How to join floater picture frame with v5-qrs clamp by MasterClamp

join Shadow-box corner frame with clamp v5-qrs 

how to operate shadow box clamp v5-qrs MasterClamp

The most reliable shadow box frame clamps are made by MasterClamp.